Wireless

Wireless Network Settings

Use this section to configure the wireless settings for your ACKSYS Bridge. Please note that changes made on this section may also need to be duplicated on your Wireless Access Point.

To protect your privacy you can configure wireless security features. This device supports two wireless security modes including: WEP and WPA-Personal. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server.

Enable

Enable Wireless Radio :

Basic Wireless Settings

Wifi Mode :	Bridge Access Point
Wireless Mode :	Infrastructure Ad-Hoc
Wireless Network Name :	(Also called the SSID)
Channel :
Transmission Rate :	(Mbit/s)
802.11 Mode :
Super G™ Mode :

Wireless Security Mode

Security Mode :

None WEP WPA-Personal

WEP

WEP is the wireless encryption standard. To use it you must enter the same key(s) into the bridge and the wireless access point. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled.

You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys.

WEP Key Length :	(length applies to all keys)
WEP Key 1 :
WEP Key 2 :
WEP Key 3 :
WEP Key 4 :
Default WEP Key :
Authentication :

WPA

WPA requires stations to use high grade encryption and authentication.

WPA Mode :
Cipher Type :

Pre-Shared Key

Pre-Shared Key :

EAP Configuration

EAP Authentication requires certificate(s) to be provided. Please upload the appropriate certificate(s) and enter authentication credentials.

EAP Type :
Username :
Password :

EAP Certificates

Upload User Cert :
	User Certificate is ready.
	The User Certificate (PKCS #12 format) is required.

	Note: Now uploading. The upload may take up to 1 minute.

Upload Root Cert :
	The Root Certificate (DER/x509 format) is required.

	Note: Now uploading. The upload may take up to 1 minute.