Hyperlan-Pack

Outdoor high speed wireless Ethernet backhaul
Hyperlan-Pack

EOL_US_3

NOTE : Hyperlan-Pack has reached the end of its life cycle. Your sales representative is at your disposal for any questions.

 

Overview

  • Cable-free building-to-building network communications …
  • Deliver 40 Mbps TCP data rate up to 5 Km or 10 Mbps TCP data rate up to 50 Km, depending on local regulations
  • Secure connectivity, narrow beam
  • 10/100 Base TX network interface
  • IP66 enclosure, Ethernet cable powered (POE)

Introduction

HyperLan-Pack is a solution to establish a high speed Ethernet wireless link between buildings, factories, CCTV cameras, offshore platforms and temporary installations ... to connect Ethernet networks or Ethernet devices between each other.

The kit is built around two WiFi units and two parabolic antennas.

 

HyperLan-Pack relies on the WiFi 5.3 GHz standard (IEEE 802.11a) which is not widely used by WiFi equipments. This offers a good level of protection against perturbations generated by existing WiFi networks; moreover, the RF radiated beam is narrow (few degrees) so it's almost undetectable.

 

Technical characteristics

 

 

Ethernet link

 

10/100 base TX Ethernet port with auto détection, waterproof M12 8-point Ethernet connector, “plug & play" mode "auto MDI/MDIX cross-over", 25 m RJ45 cable
  

 
 

 

Radio link

 

Compliant with IEEE 802.11a (5.3 Ghz)

 

 
 

 

Power, sensitivity

 

Transmitter +20 dBm, Receiver -92 dBm

 

 
 

 

Antennas

 

Directional narrow beam antenna, N-type connector, 23 or 28 dBi depending to models, lightning surge protection included, mast mounting (50 mm)

 

 
 

 

Signaling

 

LAN & WLAN activity on LEDs

 

 
 

 

Administration

 

SNMP and ACKSYS NDM

 

 
 

 

Security

 

Pre-configured WPA2-PSK, hidden SSID, narrow beam (6°)

 

 
 

 

Power supply

 

POE IEEE 802.3af or +9VDC to +75VDC, 7W typical consumption

 

 
 

 

Dimensions & weight

 

IP66 aluminum enclosure (L: 80 x l: 175 x h: 57 mm) ;

Directional antenna diameter: 60 cm (28 dBi)

 

 
 

 

Environment

 

Operating temperature: -25°C to +70°C, storage: -40°C à +80°C

 

 

 

Throughput characteristics versus communication range

 

 

Ethernet throughput (TCP)

 

 

 

Range

 
 

 

10Mbps

 

 

 

50 km

 
 

 

20Mbps

 

 

 

20 km

 
 

 

40Mbps

 

 

 

5 km

 
  Given characteristics are theoritical and can change depending on local RF regulations concerning the maximum allowed output power (EIRP) and on environment conditions  

 

 

Application Hyperlan-Pack US

Firmware

Version Download

Firmware upgrade package for V1 products
The 2 units must be upgraded

5.34.0
vx130124

Download

Firmware upgrade package for V2 products
The 2 units must be upgraded

5.34.0
vx130124

Download

MIB (SNMP)

2.22.0
vx160129

Download

Software

Version Download
NDM : Centralized management software for WLg WiFi products, Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

NDM : Centralized management software for WLg WiFi products, non-Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

Verify Java and find out-of-date versions

Lien externe

EOL_US_3

NOTE : Hyperlan-Pack has reached the end of its life cycle. Your sales representative is at your disposal for any questions.

 

References to order

 

 

HyperLan-Pack/L

 

Ready-to-use wireless Ethernet backhaul, high speed, long range including two radio units, two 28 dBi antennas with lightning surge protection and mast mounting accessories, one 25 meters Ethernet cable per radio unit, POE power supply (not included)

 

 
 

 

HyperLan-Rad/L

 

Radome cover for parabolic dish antenna HyperLan-Pack (600 mm)