WLg-LINK

WLg-LINK

Overview

  • IEEE 802.11 a/b/g/h & super AG standards, up to 108 Mbps data rate
  • Security: WEP, WPA-PSK, WPA2-PSK and IEEE 802.1x (RADIUS)
  • Easy to use web based configuration
  • Auto-sensing 10/100 Base TX RJ45 network interface
  • +9VDC to +48VDC power supply
  • Small sized enclosure (L: 103 x W: 67 x H: 24 mm)

 

Introduction

When used in the Access Point mode, the WLg-LINK is the root element of an industrial WiFi Ethernet network.
When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

 

The WLg-LINK device is also designed to work as a wireless bridge between the wired MODBUS/TCP protocol and the radio network, this feature allows connecting of any MODBUS/TCP equipment to this network.

 

Integrators and manufacturers (point of sales, medical instrumentation, industrial automation, security systems, video surveillance, automotive, building automation ...) can right now rely on this new technology to build safety wireless network applications while freeing themselves from wiring constraints.

 

Technical characteristics

 


Ethernet link

 

 

10/100 Base TX Ethernet interface, RJ45 connector

 

 
 

 

WiFi network

 

 

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip set.

 

 
 

 

Data rate

 

 

Up to 108 Mbps (Super AG mode)

 
 

 

Channels

 

 

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)

 
 

 

Output power

 

 

Transmitter +20 dBm (TPC)

 

 
 

 

Sensitivity

 

 

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

 

 
 

 

Antennas

 

 

Two 2dBi 2.4 / 5 GHz antennas (RP-SMA connectors)

 
 

 

Modulation

 

 

OFDM : BPSK, QPSK, 16QAM, 64QAM

DSSS: DBPSK, DQPSK, CCK

 

 
   

Security

 

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

 

 
 

 

Modes

 

 

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & rapid roaming (less than 50 mS) modes are supported

 

 
 

 

Administration

 

 

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM

 

 
 

 

Operating systems

 

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 
   

Signaling

 

 

LAN & WLAN activity on LEDs

 

 
   

Power supply

 

 

+9VDC to +48VDC power source, 3-pin Phoenix terminal block

 

 
   

Consumption

 

 

3.5 Watts typical, 5 Watts maximum

 

 
   

Dimensions & weight

 

 

Small sized enclosure L: 103 x W: 67 x H: 24 mm, weight 225 g

 

 
   

Environment

 

 

Operating temperature: 0°C to +70°C, storage: -65 to +100°C
Humidity: 5% to 95% (non-condensing)

 

 

Applications WLg-LINK US 

References to order

 

 

WLg-LINK

 

 

Access Point, Ethernet Bridge, repeater (WDS) module for wireless WiFi IEEE 802.11a/b/g/h & super AG, shipped with two 2dBi 2.4 / 5 GHz antenna

 

 
 

 

PWS12-UNI-PH3

 

 

AC (110V / 220V) to 12VDC power adapter with cable terminated by a 3-pin Phoenix terminal block