WLg-LINK-OEM

Compact access point, Ethernet bridge & repeater (WDS)
WLg-LINK-OEM

EOL_US_3NOTE : WLg-LINK has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : EmbedAir100. Your sales representative is at your disposal for any questions.

 

Overview

  • IEEE 802.11 a/b/g/h & super AG standards, up to 108 Mbps data rate
  • Security: WEP, WPA-PSK, WPA2-PSK and IEEE 802.1x (RADIUS)
  • Easy to use web based configuration
  • Auto-sensing 10/100 Base TX network interface (TTL or RJ45)
  • +3.3VDC or +5VDC power supply
  • Small sized PCB (L: 89 x W: 51 x H: 20 mm)

Introduction

When used in Access Point mode, the WLg-LINK-OEM is the root element of an industrial WiFi Ethernet network.
When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

 

The WLg-LINK-OEM device is also designed to work as a wireless bridge between the wired MODBUS/TCP protocol and the radio network, this feature allows connecting any MODBUS/TCP equipment to this network.

 

Integrators and manufacturers (point of sales, medical instrumentation, industrial automation, security systems, video surveillance, automotive, building automation ...) can right now rely on this new technology to safely build wireless network applications while freeing themselves from wiring constraints.

 

Technical characteristics

 

 

Ethernet link

 

10/100 Base TX Ethernet interface, RJ45 or TTL Ethernet interface (HE10 connector)

 

 
 

 

WiFi network

 

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip set.

 

 
 

 

Data rate

 

Up to 108 Mbps (Super AG mode)

 

 
 

 

Channels

 

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)

 

 
 

 

Output power

 

Transmitter +20 dBm (TPC)

 

 
 

 

Sensitivity

 

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

 

 
 

 

Antennas

 

2 Hirose UFL connectors enable to connect up to 2 antennas for diversity

 

 
 

 

Modulation

 

OFDM : BPSK, QPSK, 16QAM, 64QAM

DSSS : DBPSK, DQPSK, CCK

 

 
 

 

Security

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

 

 
 

 

Modes

 

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported

 

 
 

 

Administration

 

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM

 

 
 

 

Operating systems

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 

 
 

 

Signaling

 

LAN & WLAN activity on LEDs

 

 
 

 

Power supply

 

From +3.3VDC or +5VDC power source on an HE10 connector

 

 
 

 

Consumption

 

3.5 Watts typical, 5 Watts maximum

 

 
 

 

Dimensions

 

Small sized PCB L: 89 x W: 51 x H: 20 mm, 47 g

 

 
 

 

Environment

 

Operating temperature: -20°C to +70°C, storage: -65 to +100°C
Humidity: 5% to 95% (non-condensing), please consult us for the -40°C to +85°C range

 

 

Applications WLg-LINK-OEM US 

Firmware

Version Download
Firmware type 1 upgrade package

4.18.0
vx091022

Download
Firmware type 2 upgrade package

5.54.2
vx180126

Download

MIB (SNMP)

2.22.0
vx160129

Download

Software

Version Download
NDM : Centralized management software for WLg WiFi products, Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

NDM : Centralized management software for WLg WiFi products, non-Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

Verify Java and find out-of-date versions

Lien externe

EOL_US_3NOTE : WLg-LINK has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : EmbedAir100. Your sales representative is at your disposal for any questions.

 

References to order

 

 

WLg-LINK-OEM-RJ

 

Access Point, Ethernet Bridge, repeater (WDS) module for wireless WiFi IEEE 802.11a/b/g/h & super AG, without antenna nor antenna cable, RJ45 Ethernet interface (per quantities only)

 

 
 

 

WLg-LINK-OEM-TTL

 

Access Point, Ethernet Bridge, repeater (WDS) module for wireless WiFi IEEE 802.11a/b/g/h & super AG, without antenna nor antenna cable, TTL Ethernet interface (per quantities only)

 

 
 

 

WL-KIT-ANT-1a

 

15 cm Hirose UFL cable with RSMA connector and bi-band 2.4 / 5 Ghz antenna (0 dBi)

 

 
 

 

WLg-LINK-OEM-EVAL

 

Contains both WLg-LINK-OEM-RJ PCB and the WL-KIT-ANT-1a antenna / cable kit / +5VDC power supply

 

 
 

 

WLg-RF400MW

 

High power radio option (26 dBm, 400 mW), requires the WLg-LINK-OEM module to be powered from a 3.3 VDC power source only