WLg-SWITCH
3-in-1 combo: Rugged 8-port Ethernet switch, POE injector, WiFi AP / BRIDGE / REPEATERNOTE : WLg-SWITCH has reached the end of its life cycle (to know more about its different deadlines click here).
Your sales representative is at your disposal for any questions.
Overview
-
WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
-
Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
-
Web based configuration, SNMP administration
-
8-port Ethernet 10/100 Base TX with PoE 802.3af injector
-
Dual DC power supply input (+9VDC to +75VDC)
-
IP30 metal enclosure, DIN rail or panel mounting
Introduction
WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.
Both Switch and power injector are manageable that make it possible to offer advanced configuration.
WLg-SWITCH can be managed using a web browser or SNMP; the “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment, giving it a high availability.
WLg-SWITCH fulfills the most severe requirements in terms of operating environment: operating temperature from -25°C to +70°C (-4°F to 158°F), shock and vibration proof according to MIL-STD-810F standard, IP 30 seal rating.
Technical characteristics
|
8-port 10/100 Base TX Fast Ethernet interface, RJ45 connector, auto MDI/MDIX crossover, IEEE 802.3x full-duplex and half-duplex auto-adaptive, wire-speed reception and transmission, high performance lookup engine, automatic address learning and aging, 120W PoE PSE feature according to IEEE 802.3.af |
||
WiFi network
|
Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set
|
||
Radio data rate
|
Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps
|
||
Channels
|
13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
|
||
Output power
|
Transmitter +20 dBm (Optional 26 dBm) |
||
Sensitivity
|
Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b |
||
Antennas
|
Two 2dBi 2.4 / 5 GHz antenna for diversity mode |
||
Modulation
|
OFDM: BPSK, QPSK, 16QAM, 64QAM DSSS: DBPSK, DQPSK, CCK
|
||
Security
|
64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control
|
||
Modes
|
Access point to build a WiFi network infrastructure, Bridge, Bridge router, fast roaming, Infrastructure & AD-HOC, BRIDGE ROUTER, rapid roaming (less than 50 mS) modes are supported
|
||
Administration
|
Built-in WEB interface, SNMP V2c agent, ACKSYS NDM (Networking Device Manager).
|
||
Operating systems |
Windows, Linux, UNIX as well as any operating system supporting TCP/IP
|
||
Protocols
|
Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …
|
||
Signaling
|
Led display for power supplies, LAN on each port & WLAN activity, radio receive level
|
||
Alarms
|
Relay output warning: power failure, LAN or WLAN connection failure, Watchdog.
|
||
Power supply
|
Dual input, +9 to +75VDC, removable clamp cage terminal
|
||
Consumption
|
10 Watts maximum (PoE injector power consumption not included)
|
||
Dimensions & weight
|
L: 110 mm x W: 50 mm x H: 151 mm (4.33 x 1.97 x 5.94 inch), weight 650g (22.9 oz)
|
||
Environment
|
Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F),
|
Datasheet
Technical documentation
Firmware
Version | Download | |
---|---|---|
Firmware type 3 upgrade package |
5.54.2 |
|
MIB (SNMP) |
2.22.0 |
Software
NOTE : WLg-SWITCH has reached the end of its life cycle (to know more about its different deadlines click here).
Your sales representative is at your disposal for any questions.
References to order
WLg-SWITCH
|
3-in-1 combo: 8-Port Ethernet switch, WiFi Access Point / Ethernet Bridge / Repeater (IEEE 802.11a/b/g/h & super AG, 2.4 / 5 GHz operation), 8-port power injector (130W), shipped with two 2dBi 2.4 / 5 GHz antennas
|
||
C-Key_M1
|
Save / Restore configuration key for the WLg-Switch |
||
WLg-RF400MW
|
High power radio option (26 dBm, 400 mW) |
||
WLg-FIX-PLQ
|
Panel fixing metallic plate |
||
CAB-RJ45-1M
|
1 meter Ethernet RJ45 cable, straight |