|
 |
This new range of serial to USB solution (USBPort/x) offers performance,
simplicity of installation, security, robustness and high reliability.
USBPort/x is proposed in two models: 2 and 4 isolated port with 3 in
1 serial interface RS232, RS422 & RS485 in order to cover all technical
requirements of industrial environments.
USBPort/x installation is quite simple as the product is instantly plug
& play, it doesn't require any IRQ, DMA or I/O port resources.
Installed serial ports are considered by Windows 2000, 2003, XP, VISTA, SEVEN & Linux operating systems as computer's standard COM ports.
|
|
2 or 4 ports with
built-in 3 in 1 serial electrical interface: RS232, RS422
& RS485 |
|
|
Each serial port supports from 300 to 3 Mbps (accurate adjustment thanks to a decimal divider) |
|
Built-in FIFOs: TX 256 bytes, RX 384 bytes |
|
|
Built-in self line turn-around in the RS485
mode |
|
|
Support of both 4 wires RS422/RS485 &
RS485 2 wires electrical interfaces |
|
|
LEDs signalling of the state of TxD &
RxD signals on each port |
|
|
Powered from USB bus or from an
external power source (+9VDC to +36VDC) |
|
|
Hot "Plug & Play",
USB 2.0 standard full speed, USB 1.1 compatible |
|
|
Installed COM ports are compatible with Windows
standard COM ports |
|
|
15 KV line surge protection, HF filtering |
|
|
1500V opto isolation on RS422/RS485 serial
ports |
|
|
Robust metallic case, CE industrial standards
conformity |
|
References to order:
| USBPort/2 |
Isolated 2-port RS232/RS422/RS485
serial Hub, power from USB bus or from an external power source +9VDC
to +36VDC, 2 meters USB type A/B cable provided |
| USBPort/4 |
Isolated 4-port RS232/RS422/RS485
serial Hub, power from USB bus or from an external power source +9VDC
to +36VDC, 2 meters USB type A/B cable and PWS-12 are supplied |
| PWS-12 |
Optional external power source
(+12VDC / 5.5W) for USBPort/x series (required when chaining several
devices on the same USB port or when the USB HUB deliver less than 500 mA) |
|
|
