ACKSYS proposes a wide range of wireless equipments (WLAN) for industry and transportation fields relying on the WiFi IEEE 802.11n a/b/g standards (2.4, 5 & 5.4 GHz) and on the 900 MHz unlicensed radio band for long range and non-line-of-sight operation including: access points, bridges, bridges routers, repeaters, serial to wireless gateways, radio switches, packs for point to point communications.

Click to this link to learn more about "Wireless network solutions for SCADA".

These equipments make it possible to:

 

       Build a wireless network
       Connect RS232, RS422, RS485 serial equipments together without any wiring operation
       Connect Ethernet networks together without any cable
       Build a wireless bridge between a serial MODBUS network and MODBUS/TCP
       Wirelessly connect Ethernet, MODBUS/TCP, PROFINET, Ethernet/IP, DNP3 equipments ...


 



Click on the product name to reach
technical specifications pages ...


Point to point solutions (short & long range)

Product
Functions
Ethernet wireless backhaul, kit made from 2 pre-configured units (OFDM backhaul)
Point-to-point Ethernet wireless connection, kit made from 2 pre-configured units
Format
IP 66 enclosure + parabolic antenna
Universal mounting box (wall and Din Rail)
Dimensions
L:103 x W:67 x H:23 mm (module)
d:44 or 60 cm (antenna)
L:103 x W:67 x H:23 mm (per unit)
Ethernet link
10/100 Base Tx auto-sensing, auto MDI/MDIX cross-over, 25 m cable
10/100 Base Tx auto-sensing
Maximum speed (TCP data throughput )
40 Mbps
40 Mbps
Radio link
WiFi IEEE 802.11a
WiFi IEEE 802.11a
Frequency range
5.3 GHz (OFDM)
5 GHz
Antennas
23 or 28 dBi antenna N-type connector
Built-in lightning surge protection
One 2 dBi antenna on each unit (RP-SMA connector)
Nominal range with built-in antennas
Up to 4 Km (@ 40 Mbps), line of sight
300m, line of sight
Security
Pre-configured WPA2-PSK, hidden SSID
Pre-configured WPA2-PSK, hidden SSID
Configuration
Ready to use, nothing to configure
Ready to use, nothing to configure
Administration
SNMP, ACKSYS NDM
SNMP, ACKSYS NDM
Power supply
Powered from the data cable (IEEE 802.3af) or from a DC source (+9VDC to +75VDC)
External, +5VDC on jack connector
Power consumption
7W typical for each unit
3.5W typical for each unit
LED signaling





Click on the product name to reach
technical specifications pages ...


Multi-functions products

Product
 
Fonctions
8-port Ethernet " Ethernet switch, 120W POE injector,
WiFi bridge / bridge router / access Point / repeater (WDS)
Format
Pannel or din Rail metal enclosure, IP30 seal rating
Dimensions
Weight
L:110 x W:50 x H:151 mm
650 g
Number of serial channels
-
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway
Windows COM port redirection
-
Serial Link
-
Maximum Speed
108 Mbps
Connections type
8 x RJ45 connectos for Ethernet, screw-in terminal for the power supply
Connection cable
-
Ethernet link
8-port 100 Base TX Ethernet switch, 10/100 auto-sensing, auto MDI/MDIX
Radio link
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Frequency range
2.4 / 5 / 5.4 GHz
High power RF card option
400 mW
Radio Modem (AD HOC) mode
Bridge mode
Rapid roaming
< 50 mS
Antennas
2 omnidirectionnal 2 dBi 2.4 / 5 GHz antennas
External antenna connector for long range communications
2 RPSMA Jack connectors (reverse SMA femelle)
Nominal range with built-in antennas
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
Number of WiFi clients in AP mode
30
Administration
Web browser
SNMP, ACKSYS NDM
Default signaling

Relay output warning: power failure, LAN or WLAN connection failure, watchdog

Data plug for easy configuration save & restore (C-KEY)
optional
Power supply
DC dual input +9VDC to +72VDC
Power consumption
10W typical (injector not comprised)
Power injector POE / PSE
On the 8 Ethernet ports, requires a +48VDC (120W) power source
Environnement
Operating temperature from -25°C to +70°C
LED signaling
RF level display
Bridge mode




Click on the product name to reach
technical specifications pages ...


Compact industrial solutions

Product
Fonctions
Ethernet wireless WiFi bridge, bridge router, access Point, repeater (WDS) & virtual cable Serial to wireless Ethernet gateway & virtual cable
Format
Universal mounting box
(wall and Din Rail)
Universal mounting box
(wall and Din Rail)
Dimensions
L:103 x W:67 x H:24
mm
L:103 x W:67 x H:24
mm
Number of serial channels
-
1
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway
Serial MODBUS to
MODBUS/TCP data gateway
Windows COM port redirection
-
Serial Link
-
RS232
Maximum Speed
108 Mbps
250 Kb/s
RS connection
-
Sub D9 male
Ethernet link
100 Base Tx (RJ45)
10/100 compatible
-
Radio link
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Frequency range
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
Radio Modem (AD HOC) mode
Bridge mode
Rapid roaming
< 50 mS
< 50 mS
Antennas
1 omnidirectionnal
antenna
1 omnidirectionnal
antenna
External antenna connector for long range communications
RP-SMA connector
RP-SMA connector
Nominal range with built-in antennas
300m, open field
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
Number of WiFi clients in AP mode
30
-
Administration
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, web browser, SNMP, ACKSYS NDM
Power supply
External, +5VDC on
jack connector
External, +5VDC on
jack connector
Power consumption
3.5W typical
3.5W typical
LED signaling



Click on the product name to reach
technical specifications pages ...


Wireless solutions for automotive & transportation applications

Product
Fonctions
Ethernet Bridge, bridge router, access Point, repeater, Mesh point (IEEE 802.11s) 2-port Ethernet, dual WiFi radio: Bridge, bridge router, access Point,
repeater, Mesh point IEEE 802.11s)
2-port Ethernet WiFi bridge, bridge router, access Point,
repeater (WDS) &
virtual cable
Ethernet WiFi bridge, bridge router, access Point,
repeater (WDS) &
virtual cable
Serial to wireless
Ethernet gateway
& virtual cable
Format
IP66 aluminun enclosure, universal mounting
IP66 aluminun enclosure, universal mounting
IP66 aluminun enclosure, universal mounting
IP65 aluminun enclosure, universal mounting
IP65 aluminun enclosure, universal mounting
Dimensions
Weight
L:185 x W:64 x H:35 mm
450 g
L:160 x W:220 x H:35 mm
1200 g
L:80 x W:175 x H:57 mm
820 g
L:115 x W:64 x H:35 mm
370 g
L:115 x W:64 x H:35 mm
330 g
Number of serial channels
-
1
-
-
1
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway Serial MODBUS to
MODBUS/TCP
data gateway
Windows COM port redirection
-
-
-
-
Serial Link
-
Insulated RS422, RS485
-
-
RS232, RS422, RS485
Maximum Speed
300 Mbps
2 x 300 Mbps
108 Mbps
108 Mbps
250 Kb/s
Connections type
Terminal block
(inside enclosure)
CAT-6A M12 connectors
for Ethernet, 6-point
M12 for power supply, 8-point M12 for serial, 4-point for I/O
4-point M12 connectors
for Ethernet, 5-point
M12 for power supply
Terminal block (inside enclosure)
Terminal block
(inside enclosure)
Connection cable
2 meters cable with RJ45 connector & power wires
1 x M12 power supply cable and 1 x M12 Ethernet cable
1 x M12 power supply cable and 1 x M12 Ethernet cable
2 meters cable with RJ45 connector & power wires
40cm cable with
SUB D9 male connector
& power wires
Ethernet link
Gigabit 10/100/1000 auto-sensing, auto-MDI/MDIX
2-port Gigabit 10/100/1000 auto-sensing, auto-MDI/MDIX
2-port 100 Base Tx switch
10/100 compatible
100 Base Tx switch
10/100 compatible
-
Radio link
Triband radio
WiFi IEEE 802.11n a/b/g
(MIMO 3T3R)
1 or 2 triband radios
WiFi IEEE 802.11n a/b/g
(MIMO 3T3R)
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Radio redundancy
-

Internally between the two radios or externally between two devices
-
-
-
Frequency range
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
High power RF card option
-
400 mW
400 mW
-
-
Radio Modem (AD HOC) mode
Bridge mode
Bridge mode
Bridge mode
Bridge mode
Rapid roaming
< 30 mS
0 mS (dual radio)
< 50 mS (single radio)
< 50 mS
< 50 mS
< 50 mS
Antennas
Not shipped with the product
Not shipped with the product
2 omnidirectionnal 2 dBi antennas
1 omnidirectionnal 2 dBi antenna
1 omnidirectionnal 2 dBi antenna
External antenna connector for long range communications
3 RP-SMA connector
6 weather Proof female N-type connectors
Weather Proof female N-type connectors
RP-SMA connector
RP-SMA connector
Nominal range with built-in antennas
300m, open field
300m, open field
300m, open field
300m, open field
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
Number of WiFi clients in AP mode
100
100
30
30
-
Administration
Web browser
SNMP, ACKSYS NDM, serial port, Telnet/SSH, CLI
Web browser
SNMP, ACKSYS NDM, serial port, Telnet/SSH, CLI
Web browser
SNMP, ACKSYS NDM
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, NDM,
web browser
Default signaling
-
Relay output warning: power failure, LAN or WLAN connection failure, watchdog
/NI & /NPI models only: relay output warning: power failure, LAN or WLAN connection failure, watchdog - -
Data plug for easy configuration save & restore (C-KEY)
- optional optional - -
Digital inputs
- 1 insulated digital input - - -
Power supply
Built-in DC +9VDC to +36VDC
Built-in redundant DC +9VDC to +72VDC or EN50155 isolated +24VDC, +48VDC, +72VDC or +110VDC
Built-in redundant DC +9VDC to +72VDC, +9VDC to +36VDC insulated, +36VDC to +140VDC insulated
Built-in DC +9VDC to +50VDC
Built-in DC +9VDC to +50VDC
Power consumption
10W typical
16W typical (one radio)
21W typical (two radios)
8W typical
(10W with 400mW radio)
3.6W typical (/NP 4W)
3.5W typical
Power over Ethernet
PoE (IEEE 802.3af / at)
- Poe Plus for the basic model (+9VDC to +72VDC) /NP & /NPI models /NP model -
Environnement
UTAC E2 certified
Shocks & vibrations MIL-STD-810F
Qualified for on-road applications
Operating temperature from -25°C to +70°C
UTAC E2 certified
Shocks & vibrations MIL-STD-810F
Qualified for on-road, railways transportation (EN50155 / EN 50121)
Operating temperature from -25°C to +70°C or extended -40°C to +75°C
(-55°C cold start with optional PTC heater)
UTAC E2 certified
Shocks & vibrations MIL-STD-810F
Qualified for on-road, railways transportation
(EN50155 / EN 50121)
Operating temperature from -25°C to +70°C or extended -40°C to +80°C
UTAC E2 certified
Shocks & vibrations MIL-STD-810F
Qualified for on-road applications
Operating temperature from -25°C to +70°C
UTAC E2 certified
Shocks & vibrations MIL-STD-810F
Operating temperature from -25°C to +70°C
Temperature monitoring
-
-
-
LED signaling
RF level display
Bridge mode
for each radio in Bridge mode
-
-
-



Click on the product name to reach
technical specifications pages ...


Wireless solutions for industrial automation

Product
Fonctions
Ethernet WiFi bridge, bridge router, access Point,
repeater (WDS) &
virtual cable
Ethernet WiFi bridge, bridge router, access Point,
repeater (WDS) &
virtual cable
Serial to wireless
Ethernet gateway
& virtual cable
Format
Single-slot M340
backplane module
(SCHNEIDER ELECTRIC)
Pannel or din Rail metal enclosure, IP30 seal rating
Pannel or Din Rail metal enclosure, IP30 seal rating
Dimensions
Weight
L:97 x W:32 x H:104 mm
200 g
L:110 x W:50 x H:120 mm
570 g
L:110 x W:50 x H:120 mm
550 g
Number of serial channels
-
-
1
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP & Ethernet/IP support MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway Serial MODBUS to
MODBUS/TCP
data gateway
Windows COM port redirection
-
-
Serial Link
-
-
RS232, RS422, RS485
Maximum Speed
108 Mbps
108 Mbps
250 Kb/s
Connections type
3 RJ45 Ethernet connectors
1 is reserved for M340 direct connection
2 RJ45 Ethernet connectors
RS232 (SUB D 9 male), RS422/485 (5-point screew-in terminal block)
Connection cable
1 straight Ethernet cable for M340 CPU connection
1 straight Ethernet cable (1m)
1 serial cross cable (1.8m)
Ethernet link
3-port 100 Base TX Ethernet switch, 10/100 auto-sensing, auto MDI/MDIX
2-port 100 Base TX Ethernet switch, 10/100 auto-sensing, auto MDI/MDIX
-
Radio link
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Frequency range
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
High power RF card option
-
400 mW
400 mW
Radio Modem (AD HOC) mode
Bridge mode
Bridge mode
Rapid roaming
< 50 mS
< 50 mS
< 50 mS
Antennas
1 omnidirectionnal 2 dBi antenna
1 omnidirectionnal 2 dBi antenna
1 omnidirectionnal 2 dBi antenna
Additional antenna connector
-
RP-SMA connector
RP-SMA connector
Nominal range with built-in antennas
300m, open field
300m, open field
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
Number of WiFi clients in AP mode
30
30
-
Default signaling

-

Relay output warning: power failure, LAN or WLAN connection failure, watchdog

Relay output warning: power failure, WLAN connection failure, watchdog
Administration
Web browser
SNMP, ACKSYS NDM
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, NDM,
web browser
Data plug for easy configuration save & restore (C-KEY)
- optional optional
Power supply
Power from the +24VDC
(M340 backplane)
DC dual input +9VDC to +36VDC
DC dual input +9VDC to +36VDC
Power consumption
3.5W typical
4.5W typical
4.5W typical
Hot Swap
-
-
Power over Ethernet
POE (IEEE 802.3af)
- /NP model -
Environnement
Operating temperature from -20°C to +70°C Operating temperature from -20°C to +70°C Operating temperature from -20°C to +70°C
LED signaling
RF level display
Bridge mode
Bridge mode



Click on the product name to reach
technical specifications pages ...


ATEX industrial solutions for explosive area

Product
Fonctions
2-port Ethernet wireless WiFi Bridge, bridge router, access Point, repeater (WDS) & virtual cable Serial to wireless Ethernet gateway & virtual cable
Format
ATEX EX II 2GD EExd IIC, IP66 enclosure
ATEX EX II 2GD EExd IIC, IP66 enclosure
Dimensions & weight
L:276 x W:276 x H:217
mm , 12 Kg
L:276 x W:276 x H:217
mm , 11.1 Kg
Number of serial channels
-
1
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway
Serial MODBUS to
MODBUS/TCP data gateway
Windows COM port redirection
-
Serial Link
-
RS232, RS422 & RS485
Maximum Speed
108 Mbps
250 Kb/s
RS connection
-
Screw-in terminal
Ethernet link
100 Base Tx
10/100 compatible (screw-in terminal)
-
Radio link
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Wireless WiFi
IEEE 802.11b
IEEE 802.11g compatible
Frequency range
2.4 GHz (5 GHz optional)
2.4 GHz
Radio Modem (AD HOC) mode
Bridge mode
Rapid roaming
< 50 mS
-
Antennas
2 omnidirectionnal 3 dBi
antennas
2 omnidirectionnal 3 dBi
antennas
Nominal range with built-in antennas
300m, open field
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WEP 64/128 bits
Number of WiFi clients in AP mode
30
-
Administration
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, web browser
Power supply
Built-in & Universal 85-264 VAC
(+9 to +75 VDC optional)
Built-in & Universal 85-264 VAC
Power consumption
7 W typical
3W
LED signaling
(inside enclosure)
(inside enclosure)


Click on the product name to reach
technical specifications pages ...


Embedded wireless modules for OEMs

Product
Fonctions
Ethernet Bridge, bridge router, access Point, repeater, Mesh point (IEEE 802.11s) Ethernet wireless WiFi Bridge, bridge router, access Point, repeater (WDS) & virtual cable Serial to wireless Ethernet gateway & virtual cable
Format
Printed circuit
(PCB)
Printed circuit
(PCB)
Printed circuit
(PCB)
Dimensions
L:103 x W:57 x H:20 mm
L:89 x W:51 x H:20 mm
L:89 x W:57 x H:19 mm
Ethernet link
1000 Base Tx (RJ45 or TTL)
10/100 compatible
100 Base Tx (RJ45 or TTL)
10/100 compatible
-
Serial link
2 (TTL level)
-
RS232 or TTL serial interface
Maximum speed
300 Mbps (3T3R radio) 108 Mbps 250 Kbps
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway Serial MODBUS to
MODBUS/TCP data gateway
Windows COM port redirection
-
-
Radio link
Triband wireless WiFi MIMO
IEEE 802.11n a/b/g/h
(2T2R or 3T3R)
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Triband wireless WiFi
IEEE 802.11a/b/g/h &
Super AG
Frequency range
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
2.4 / 5 / 5.4 GHz
High power RF card option
400 mW
400 mW
400 mW
Radio Modem (AD HOC) mode
Bridge mode
Bridge mode
Rapid roaming
< 30 mS
< 50 mS
< 50 mS
Antenna connectors
2or 3 x HIROSE UFL
2 x HIROSE UFL
2 x HIROSE UFL
Nominal range with built-in antennas
300m, open field
300m, open field
300m, open field
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
Number of WiFi clients in AP mode
100
30
-
Administration
Web browser
SNMP, ACKSYS NDM, serial port, Telnet/SSH, CLI
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, web browser, SNMP, ACKSYS NDM
Power supply
+5VDC on HE10 header connector
+3.3VDC and +5VDC
on HE10 header connector
+3.3VDC and +5VDC
on HE10 header connector
Power consumption
8W typical
3.5W typical
3.5W typical
Environment
-20°C to +70°C or extended
-40°C to +75°C
-20°C to +70°C or extended
-40°C to +85°C
-20°C to +70°C or extended
-40°C to +85°C
Temperature probe
- -
Miscellaneous peripherals
C-Key, I/O, I2C, unique serial number - -
LED signaling
RF level display
Bridge mode
-
-


Click on the product name to reach
technical specifications pages ...


900 MHz solutions for SCADA

Product
Fonctions
2-port Ethernet bridge, bridge router, access Point,
repeater (WDS) &
virtual cable
Serial to wireless
Ethernet gateway
& virtual cable
Format
Pannel or din Rail metal enclosure, IP30 seal rating
Pannel or Din Rail metal enclosure, IP30 seal rating
Dimensions
Weight
L:110 x W:50 x H:120 mm
570 g
L:110 x W:50 x H:120 mm
550 g
Number of serial channels
-
1
MODBUS / PROFINET / Ethernet/IP support
MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway Serial MODBUS to
MODBUS/TCP
data gateway
Windows COM port redirection
-
Serial Link
-
RS232, RS422, RS485
Maximum Speed
54 Mbps
250 Kb/s
Connections type
2 RJ45 Ethernet connectors
RS232 (SUB D 9 male), RS422/485 (5-point screew-in terminal block)
Connection cable
1 straight Ethernet cable (1m)
1 serial cross cable (1.8m)
Ethernet link
2-port 100 Base TX Ethernet switch, 10/100 auto-sensing, auto MDI/MDIX
-
Frequency bands
902, 907, 912, 917 MHz (unlicensed ISM)
902, 907, 912, 917 MHz (unlicensed ISM)
Radio Modem (AD HOC) mode
Bridge mode
Rapid roaming
< 50 mS
< 50 mS
Antennas
1 omnidirectionnal 2 dBi 900 MHz antenna
1 omnidirectionnal 2 dBi 900 MHz antenna
Additional antenna connector
RP-SMA connector
RP-SMA connector
Nominal range with built-in antennas
50 Km open field, 400 m indoor
(antenna dependent)
50 Km open field, 400 m indoor
(antranna dependent)
Security
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
SSID broadcast control
WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering
Number of clients in AP mode
30
-
Default signaling

Relay output warning: power failure, LAN or WLAN connection failure, watchdog

Relay output warning: power failure, WLAN connection failure, watchdog
Administration
Web browser
SNMP, ACKSYS NDM
Serial link, Telnet, NDM,
web browser
Data plug for easy configuration save & restore (C-KEY)
optional optional
Power supply
DC dual input +9VDC to +36VDC
DC dual input +9VDC to +36VDC
Power consumption
8W typical
8W typical
Power over Ethernet
POE (IEEE 802.3af)
-
Environnement
Operating temperature from -20°C to +70°C Operating temperature from -20°C to +70°C
LED signaling
RF level display
Bridge mode

 


Old solutions no more featured in the catalogue

Click on the reference to access the complete product information ...

Reference
Status
Replacement reference
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)
Stopped (1)

Note (1): However, stopped products can be manufactured under some conditions, please consult us ...



Products | Engineering & Services | Technology | New products | Applications | Distributors | News | On-line services | The company | Home