|
|
 |
|
|
WL-ABOARD/N
WiFi Access Point & Ethernet Bridge for automotive applications
|
|
 |
|
10 R- 02 05053 |
ACKSYS characterizes its range of wireless communication solutions (WiFi) by introducing a new model designed for embedded
applications in the transportation fields.
WL-ABOARD/N is a rugged equipment designed for applications in road and
rail transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, forklifts, trailers, tractors or cranes, for material handling,
real-time information transmission, and inventory management.
It fulfils the most severe requirements in terms of operating environment:
from -25°C to +80°C, shockproof and vibration proof according to MIL-STD-810F standard, seal rating IP66 for protection against dust and water projections.
The product is UTAC E2 certified (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all
on-road equipments.
| |
 |
WL-ABOARD/N comes with an omnidirectional 2 dBi built-in antenna (standard coverage), an external higher gain antenna can be connected instead for long distance communications through an RP-SMA connector.
 |
10 BASE T Ethernet port interface (10/100 compatible) |
|
Compliant to the IEEE 802.11b and IEEE 802.11g compatible, DSSS, (2.4 GHz wireless 11 Mbps Ethernet) recommendation, buit-in antenna & external antenna connector for long distance |
|
Supported modes : Access Point, WiFi Ethernet Bridge, AD-HOC & MODBUS/TCP data gateway, virtual Ethernet cable |
|
200 m nominal range (line of sight), 60 m in other cases (with 2 dBi antenna), up to 4 Km with a 20 dBi antennas |
|
Auto-fallback system reduces speed to 5.5, 2 and 1 Mbps for greater range and/or better signal immunity |
|
4 independent 64/128 bits WEP keys, MAC addresses filtering |
|
No peripheral driver required, configuration from standard internet web browser, firmware upgrade from the network |
|
LEDs display LAN & WLAN network activity |
|
Shockproof rugged IP66 aluminum enclosure |
|
+7VDC to +60VDC wide range power supply, 3W maximum consumption |
|
Connectors are available inside the enclosure; cable is available outside through a stuffing box. A 8-point clamp cage terminal is dedicated to Ethernet signals, 2 additional points are used for the power supply cable, antenna is connected to a waterproof RP-SMA connector |
|
MIL-STD-810F methods 514.5 & 516.5 (shocks & vibrations)
EN 301489-17 & EN 61000-6-2 (EMC), IP66 seal rating, UTAC E2 |
|
Operating temperature: -25° to +80°C (RH 0-99%), storage: -40° to +70°C |
|
Weight: 360 g (with RJ45 Ethernet cable), dimensions : L: 115 x W: 64 x H: 35 mm |
|
Reference to order:
| WL-ABOARD/N |
Access Point & WiFi Ethernet Bridge, DC 7-60V power supply, POE IEEE 802.3af, built-in antenna and RP-SMA connector for
an external antenna , RJ45 Ethernet cable |
External antennas, RF cables, WiFi accessories:
| You can purchase antennas and radio frequency equipments for transportation applications from HUBER+SUHNER |
|
|
 |
Click on the icon to the left to access the information request form |
 |
Click on the icon to the left to access the online documentations |
 |
Click to the PDF icon to download the technical data sheet |
 |
|
Click to the icons on the right to download the UTAC & French Ministery of Transportation certificates |
|
|
|
|
