|
|
 |
 |
|
WL-ACCESS
WiFi access point and Ethernet bridge for industrial applications
|
|
 |
 |
 |
The WL-ACCESS device used in the ACCESS POINT mode makes it possible to create an industrial WiFi
wireless network from any industrial equipment featuring an 10/100 Ethernet
interface.
Used in the BRIDGE mode, the WL-ACCESS enables to connect any industrial equipment
featuring a 10/100 Ethernet interface to the WiFi wireless network.
The WL-ACCESS device is also designed to work as a wireless bridge between
the wired MODBUS/TCP protocol and the radio network, this feature allows
to connect any MODBUS/TCP equipment to this network.
Thanks to its built-in WEB interface, the setup of the device is achieved
using the web browser installed on your computer (Internet Explorer, Netscape,
Mozilla ...).
WL-ACCESS doesn't require any additional software to be installed in your
computer (no peripheral driver needed).
WL-ACCESS comes with omnidirectional 2 dBi built-in antennas (standard
coverage), an external higher gain antenna can be connected instead for
long distance communications through
a RP-SMA connector.
Integrators and manufacturers (point of sales, medical instrumentation,
industrial automation, security systems, building automation, mobile devices
...) can right now rely on this new technology to build safety wireless
network applications while freeing themselves from wiring constraints.
Click to this link to learn more about "Wireless
Ethernet network applications fields".
 |
10/100 Ethernet port interface,
RJ45 connector |
|
Wireless link compliant to WiFi
IEEE 802.11b, DSSS, 2.4 GHz, IEEE 802.11g compatible |
|
Omnidirectional 2 dBi built-in
antennas and RP-SMA connector for external systems |
|
200 m nominal range (line of sight), 60 m in other cases (with 2 dBi antennas), up to 4 Km with a 20 dBi antennas |
|
auto-fallback system reduces speed to 5.5,
2 and 1 Mbps for greater range and/or better signal immunity |
|
4 independent 64/128 bits WEP keys, MAC addresses
filtering |
|
No peripheral driver required,
configuration from standard internet web browser |
|
LEDs for both LAN & WLAN
network activity,
link quality and radio signal level (6 LEDs) in the BRIDGE mode |
|
Robust metallic case, CE industrial standards
conformity, ESD surge protection and built-in universal
(85 to 264 VAC) power supply or DC power supply (+9VDC to
+36VDC) |
|
POE "Power Over Ethernet" IEEE 802.3af available with the DC model |
|
Removable RF circuit for easy upgrade in
order to follow the WiFi specification evolution |
|
References to order:
| WL-ACCESS |
Wireless WiFi IEEE 802.11b access
point & Ethernet Bridge, built-in AC power supply (85-264VAC), built-in antennas and
RP-SMA external antenna connector |
| WL-ACCESS-DC |
WL-ACCESS with DC power supply (+9VDC to
+36VDC) & POE IEEE 802.3af |
External antennas, RF cables, WiFi accessories:
 |
Click on the icon to the left to access the information request form |
 |
Click on the icon to the left to access the online documentations |
 |
Click to the PDF icon to download the technical data sheet |
|
|
|
|
