|
|
 |
 |
|
WL-ACCESS-ATEX
WiFi access point and Ethernet bridge for explosive area
|
|
 |
 |
 |
 |
ATEX equipments are designed for industrial applications in explosive environment like the chemical industries, refineries, electric stations, very dusty environments and also those where sparks and electric arcs occur...
The WL-ACCESS-ATEX device used in the ACCESS POINT mode makes it possible to create an industrial WiFi
wireless network from any industrial equipment featuring an 10/100 Ethernet
interface.
Used in the BRIDGE mode, the WL-ACCESS-ATEX enables to connect any industrial equipment
featuring a 10/100 Ethernet interface to the WiFi wireless network.
The WL-ACCESS-ATEX device is also designed to work as a wireless bridge between
the wired MODBUS/TCP protocol and the radio network, this feature allows
to connect any MODBUS/TCP equipment to this network.
Thanks to its built-in WEB interface, the setup of the device is achieved
using the web browser installed on your computer (Internet Explorer, Netscape,
Mozilla ...).
WL-ACCESS-ATEX doesn't require any additional software to be installed in your
computer (no peripheral driver needed).
Click to this link to learn more about "Wireless
Ethernet network applications fields".
 |
Outputs for antennas, serial cable and power supply through stuffing boxes |
|
10/100 Ethernet port, screw-in terminal |
|
Wireless link compliant to WiFi
IEEE 802.11b, DSSS, 2.4 GHz, IEEE 802.11g compatible |
|
Two 3 dBi omnidirectional ground plane type for wall mounting, 1 meter of low loss cable, dimensions: 250 x 200 x 25 mm, weight: 350 g, protection: EX II 2GD EExe II T6, IP 66 |
|
200 m nominal range (line of sight), 60 m in other cases |
|
auto-fallback system reduces speed to 5.5,
2 and 1 Mbps for greater range and/or better signal immunity |
|
4 independent 64/128 bits WEP keys, MAC addresses
filtering |
|
No peripheral driver required,
configuration from standard internet web browser |
|
LEDs for both LAN & WLAN
network activity,
link quality and radio signal level (6 LEDs) in the BRIDGE mode (inside the enclosure) |
|
AC power supply for 85 to 264 VAC, screw-in terminal |
|
EEx-d IIC CCA03 aluminum enclosure, dimensions: 276 x 276 x 217 mm, weight: 11,1 Kg, protection: EX II 2GD EExd IIC, IP 66 |
|
Extended temperature range from -25°C to +80°C (RH 0-99%) |
|
References to order:
| WL-ACCESS-ATEX |
Wireless WiFi IEEE 802.11b access point & Ethernet Bridge, built-in AC power supply (85-264VAC), 2 external omnidirectional +3 dBi antennas, ATEX IP66 |
|
|
