Ethernet Air-Pack

Ready-to-use point-to-point wireless Ethernet bridge
Ethernet Air-Pack

EOL_USNOTE : Ethernet Air-Pack has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : AirLink. Your sales representative is at your disposal for any questions.

 

Overview

  • Connection between two equipments or two networks
  • Ready to use, nothing to configure
  • 5 GHz IEEE 802.11a WiFi band (108 Mbps)
  • Secured radio link with pre-configured WPA2
  • 10/100 Base TX RJ45 auto-sensing network interface
  • AC/DC block adapters supplied

 

Introduction

Ethernet-Air-Pack is a ready-to-use solution designed to replace any Ethernet cable between equipments (PC, IP video, printers ...), replace the network cable between the RJ45-wall outlet and the computer or even to establish a wireless bridge between two independent Ethernet networks (between two buildings, two PLC's networks ...).

 

The kit is built around two pre-configured WiFi units already associated, installation doesn't require any configuration.

 

Ethernet-Air-Pack relies on the WiFi 5 GHz standard (IEEE 802.11a) which is not widely used by WiFi equipments. This offers a good level of protection against perturbations generated by existing WiFi networks; you can install as much Ethernet Air-Pack as cables to be replaced.

 

Technical characteristics

 

 

Ethernet link

 

 

10/100 Base TX Ethernet interface, RJ45 connector

 
 

 

Radio link

 

 

Compliant with WiFi IEEE 802.11a, data rate up to 108 Mbps

 

 
 

 

Power, sensitivity

 

 

Transmitter +20 dBm, Receiver –92 dBm, one 5 GHz 2 dBi antenna

 

 
 

 

Signaling

 

 

LAN & WLAN activity on LEDs

 

 
 

 

Administration

 

SNMP and ACKSYS NDM

 

 
 

 

Power supply

 

+9VDC to +48VDC power source, PHOENIX connector, 3.5 Watts typical, 5 Watts maximum

 

 
 

 

Dimensions & weight

 

 

Small sized enclosure L: 103 x W: 67 x H: 23 mm, weight 225 g

 

 
 

 

Environment

 

Operating temperature: 0°C to +70°C, storage: -40°C to +80°C
Humidity: 5% to 95% (non-condensing)

 

 

Applications Ethernet AirPack US 

Firmware

Version Download

Firmware type 1 upgrade package
The 2 units must be upgraded

4.6.0
vx080829

Download

Firmware type 2 upgrade package
The 2 units must be upgraded

5.34.0
vx130124

Download

Software

Version Download
NDM : Centralized management software for WLg WiFi products, Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

NDM : Centralized management software for WLg WiFi products, non-Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

Verify Java and find out-of-date versions

Lien externe

EOL_USNOTE : Ethernet Air-Pack has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : AirLink. Your sales representative is at your disposal for any questions.

 

Reference to order

 

 

Ethernet Air-PACK

 

Ready-to-use Point-to-Point wireless Ethernet bridge kit including two independent radio units with 2 dBi antennas, two +12VDC power supplies and two RJ45 cross Ethernet cables (1 meter)