WLg-IDA/S

Wireless RS232 / RS422 / RS485 serial device server
WLg-IDA/S

EOL_US

NOTE : WLg-IDA/S has reached the end of its life cycle (to know more about its different deadlines click here).
Your sales representative is at your disposal for any questions.

 

Overview

  • Serial RS232 / RS422 / RS485 full duplex up to 250 Kbps
  • 9-36 VDC wide range power supply
  • IEEE 802.11 a/b/g/h WiFi radio (2.4 / 5 GHz)
  • Shock & vibration proof IP30 metal enclosure, DIN rail or panel mounting
  • Point to Point (virtual cable) & multipoint modes, virtual COM port redirector (ViP)
  • TCP Client / Server, UDP & MODBUS/TCP support

Introduction

WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer connection (Ad-Hoc mode).

 

WLg-IDA/S is designed for industrial and transportation applications, it can be used for material handling, real-time information transmission, and inventory management.

The configuration of the device is achieved using the web browser installed on your computer; it also offers SNMP administration / configuration and an optional C-Key which allows quick and easy on-site replacement of the WLg-IDA/S unit, eliminating the need to reconfigure the replacement part or to use any other equipment.

WLg-IDA/S fulfils the most severe requirements in terms of operating environment: operating temperature from -25°C to +70°C, shock and vibration proof according to MIL-STD-810F standard, IP30 seal rating.

 

Technical characteristics

 

 

Serial link

 

Full RS232 / 422 / 485 serial interface, 250 Kbps

 

 
 

 

RS signals available

 

RS232 mode: TxD, RxD, RTS, DTR, CTS, DCD, DSR, RI

RS422/485 mode: -Tx, +Tx, -Rx, +Rx (+RX and –RX signals can be polarized with jumpers)

 

 
 

 

Cables connection

 

SUB D9 male connector for RS signals, 5-point removable terminal block for RS422/485

 

 
 

 

WiFi network

 

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS’s AR5414 (AR5006XS) chip-set, single channel rapid roaming (

 

 
 

 

Radio data rate

 

Up to 108 Mbps (Super AG mode)

 

 
 

 

Channels

 

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)

 

 
 

 

Output power

 

Transmitter +20 dBm (TPC)

 

 
 

 

Sensitivity

 

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

 

 
 

 

Antennas

 

Two 2 dBi bi-band external antennas, RP-SMA connector

 

 
 

 

Modulation

 

OFDM: BPSK, QPSK, 16QAM, 64QAM

DSSS: DBPSK, DQPSK, CCK

 

 
 

 

Security

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS)

 

 
 

 

Modes

 

Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols, direct communication (ad hoc) or from access point

 

 
 

 

Administration

 

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM, TELNET from the serial link

 

 
 

 

Operating systems

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 

 
 

 

Signaling

 

Led display for power supplies, serial & WLAN activity, radio receive level

 

 
 

 

Alarms

 

Relay output warning: power failure, WLAN connection failure, Watchdog.
1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal

 

 
 

 

Power supply

 

Dual input, +9 to +36VDC

 

 
 

 

Consumption

 

4.5 Watts typical

 

 
 

 

Dimensions & weight

 

Shockproof & vibration proof metal enclosure (L: 110 x W: 50 x H: 120 mm), 550 g

 

 
 

 

Standards

 

MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations)

EN 301489-17 & EN 61000-6-2 (CEM)

 

 
 

 

Environment

 

Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F),
Humidity: 5% to 95% (non-condensing), IP 30 seal rating

 

 

 

 

Applications WLg-IDA-S US 

 

Firmware

Version Download
Firmware upgrade package

5.14.8
vx170511

Download

MIB (SNMP)

2.12.0
vx170511

Softwares

Version Download
NDM : Centralized management software for WLg WiFi products, Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

NDM : Centralized management software for WLg WiFi products, non-Windows platform, requires JAVA version 6
Do not use with WaveOS based WiFi products

2.20.2
vx170904

Télécharger

Verify Java and find out-of-date versions

Lien externe
Version Download
VIP : Virtual COM port redirector software + release notes.
Supports all 32-bit or 64-bit Windows systems (until Windows 10)

3.0.4
vx161017

Download

EOL_US

NOTE : WLg-IDA/S has reached the end of its life cycle (to know more about its different deadlines click here).
Your sales representative is at your disposal for any questions.

 

References to order

 

 

WLg-IDA/S

 

 

Wireless RS232/RS422/RS485 device server over Ethernet IEEE 802.11 a/b/g/h (WiFi 2.4 / 5 GHz), with Windows COM port redirector software (VIP), MODBUS/TCP data gateway, MODBUS/TCP gateway support, dual 9-36 VDC power supply, built-in antenna and additional RP-SMA connector for a second antenna (diversity mode)

 

 
   

C-Key_M1

 

 

Save / Restore configuration key for the WLg-IDA/S

 

 
   

WLg-RF400MW

 

High power radio option (26 dBm, 400 mW)

 

 
   

WLg-FIX-PLQ

 

 

Panel fixing metallic plate