Outdoor WiFi bridge

ACKSYS offers a secure wireless solution that is quick and easy to install, allowing you to create a wireless bridge between two independent Ethernet networks, two separate devices or two buildings by simply programming two AirXroad standard units (download configuration files). > Indoor use (harsh environment) : wall mounting > Outdoor use: installation without additional protection with antennas adapted to the environment and the distance to cover (consult the list of additional accessories). To create an outdoor medium-distance WiFi bridge (on sight and respecting the Fresnel zone), we recommend the use of gain directional antennas.

Ethernet interface	1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, 8 pts X-coded M12 connector
WiFi interface	1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz
WiFi radio data rate	802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)
Operating frequencies	ISM : 2.4-2.483 GHz (up to 14 channels) UNII : 5.15-5.25 GHz (up to 4 channels) UNII-2 : 5.25-5.35 GHz (up to 4 channels) UNII-2 ext : 5.470-5.725 GHz (up to 11 channels) UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC
RF Output power	2,4 GHz : 23,5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)
FR Sensitivity	Receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n
Antennas connections	2 RP-SMA male connectors
WiFi modes	Access point, client, MESH (IEEE 802.11s), infrastructure, fast roaming (less than 30 ms), WMM QoS
Administration	http, https, SNMP agent (V1, V2C, V3), ACKSYS WaveManager & WaveViewer administration softwares
Security	Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3
Ethernet networking	Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay
Ethernet routing	Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router
LEDs Signaling	Radio : activity – status | Ethernet : link 10/100/1000 – activity | Power : on-off
Power supply	+9VDC to +48VDC ULTRA-LOCK M12 4-point connector & PoE 802.3af
Consumption	IDLE mode : 1.7 W / Maximum average : 5.8 W / Recommended power supply : 7 W
Mechanical specifications	Dimensions : 115 mm x 64 mm x 34 mm Weight : 332 g
IP rating	IP66
Environmental conditions	Operating temperature: -40°C to +70°C, storage : -40°C à +85°C, relative humidity: 0% to 99% (non-condensing)
Standards and certifications	CE (RED) Safety : EN 62368-1:2014+A11, EN62311 EMC : EN301-489-1, EN301-489-17 Radio : EN 300 328 2.1.1 (2.4 GHz), EN 301 893 2.1.1 (5 GHz, DFS) FCC Radio : FCC ID Z9W-RMB IC Radio : IC ID 114688A RMB E-marking ECE R10 Environmental Shocks & vibrations : EN 61373 (CAT 1 CLASS B) Climatic : EN60068-2 [-1, -2, -30]
Warranty	5 years

AirXroad (2 units to order)	WiFi Access Point, Ethernet Bridge, Repeater and MESH point (IEEE 802.11n a/b/g) for automotive applications, power input from +9VDC to +48VDC plus POE, shipped without cables or antennas
Additional accessories :
WL-M12U/8X-ETH-2M WL-M12U/8X-ETH-5M WL-M12U/8X-ETH-10M WL-M12-PWR-2M WL-M12-PWR-5M WL-M12-PWR-10M WL-ANT-2458/2-ORPS AXR-SET	Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 2 meters Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 5 meters Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 10 meters M12 Sealed Power Cable, 4 Wires, 2 m, EN50155 / EN45545 Compliant M12 Sealed Power Cable, 4 Wires, 5 m, EN50155 / EN45545 Compliant M12 Sealed Power Cable, 4 Wires, 10 m, EN50155 / EN45545 Compliant Dual band (2.4 / 5 GHz) 2 dBi omni-directional RP-SMA antenna Connecting set including : 1 x WL-M12-PWR-2M + 1 x WL-M12U/8X-ETH-2M + 2 x WL-ANT-2458/2-ORPS