WLg-ABOARD

WiFi access point, Ethernet bridge & repeater (WDS)
WLg-ABOARD

Overview

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps
  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS
  • Web based configuration, SNMP administration, alarm contact
  • 2-port auto-sensing 10/100 Base TX network interface
  • Dual DC insulated power supply input (+9VDC to +140VDC), POE IEEE 802.3af
  • Shockproof rugged IP 66 aluminum enclosure

Introduction

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, tramways, freighter ships, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.

 

It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C (extended -40°C to +80°C), shockproof and vibration proof, IP66 seal rating for protection against dust and water projections.

 

WLg-ABOARD/N is certified for railway applications (EN 50155 [IEC 60571] / EN 50121-3-2 / EN 50121-4); it is E-marked (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.

 

Technical characteristics

 


Ethernet link

 

 

2-port Ethernet 10/100 auto-sensing, waterproof Ultra-Lock® M12 connectors (D-coding), plug & play mode & auto MDI/MDIX cross-over

 

 
 

 

WiFi network

 

 

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, IEEE 802.11d support, dynamic Frequency Selection (DFS), "ClearVoice" band, transmission Power Control (TPC).

 

 
 

 

Data rate

 

 

Up to 108 Mbps (Super AG mode)

 
 

 

Channels

 

2.4 GHz (802.11b/g): 14 channels / 5 GHz (801.11a/h): 24 channels

 

 
 

 

Output power

 

 

Transmitter +20 dBm (TPC), +26 dBm with the [H4] option

 

 
 

 

Sensitivity

 

 

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

 

 
 

 

Antennas

 

Two 2dBi 2.4 / 5 GHz antenna, N-type connectors, optional lightning surge protection

 

 
 

 

Modulation

 

 

OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK

 
 

 

Security

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

 

 
 

 

Modes

 

 

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported

 

 
 

 

Administration

 

 

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...), SNMP agent, ACKSYS NDM

 

 
 

 

Operating systems

 

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 

 
 

 

Alarms

 

Relay output warning: power failure, WLAN connection failure, Watchdog or user defined (SNMP)
1 FORM B solid state relay, 60V 0.15A (M12 power supply connector)

 

 
 

 

Signaling

 

LEDs signaling for LAN, WLAN network activity, 10/100 mode, MAIN & AUX power supply, C-Key

 

 
 

 

Power supply

 

9-72VDC, insulated 9-36VDC or 36-140VDC, dual input (M12 connector) or POE (IEEE 802.3af)

 

 
 

 

Consumption

 

8W typical power consumption, 10W with the 400mW radio

 

 
 

 

Dimensions & weight

 

Shockproof rugged aluminum enclosure, (L: 80 x l: 175 x h: 57 mm), 820 g with antennas

 

 
 

 

Standards

 

MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations)

EN 301489-17 & EN 61000-6-2 (CEM), IP66 seal rating, E-marked (2004/104), EN 50155

(IEC 60571) / EN 50121-3-2, EN 50121-4 (railways)

 

 
 

 

Environment

 

Operating temperature : -25°C to +70°C, extended -40°C to +80°C with [H4] option (HR 0-99%), storage : -40°C to +100°C

 

 

Applications WLg-ABOARD US 

References to order

 

 

WLg-ABOARD/N [H4]

 

WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, dual DC power input from +9VDC to +72VDC, shipped with 2 dual band 2 dBi omni-directional (2.4 / 5 Ghz), one set of 2 meters cables (M12 to RJ45 and M12 to stripped cables)

 

 
 

WLg-ABOARD/NP [H4]

 

Same as /N with POE IEEE 802.3af (without power cable)

 

 
 

WLg-ABOARD/NI [H4]

 

Same as /N with a dual DC insulated power input from +9VDC to +36VDC and alarm contact (relay)

Discontinued reference. Available until stock lasts. To learn more about its different deadlines click here.
The recommended replacement product is : WLg-ABOARD/N.

 

 
 

WLg-ABOARD/NPI [H4]

 

Same as /N with a dual DC insulated power input from +36VDC to +140VDC, POE IEEE 802.3af, alarm contact (relay)

Discontinued reference. Available until stock lasts. To learn more about its different deadlines click here.
The recommended replacement product is : WLg-ABOARD/NP.

 

 
 

ACCESSORIES

   
 

 

C-Key_M1

 

Save / Restore configuration key for the WLg-ABOARD

 

 
 

[H4] option

H4 means high power version (400mW) and extended temperature range (-40°C to +75°C)

 

 
 

WLg-ANT-LSP-N

 

Lightning Surge Protector 50 Ohms N-Type antenna 5 KA (0-6 GHz)

 

 
 

WL-PLT-1

4-point fixing plate with ground lug

 

 

 

 

M12 CABLE REFERENCES

 

 
 

 

 

 

Waterproof M12 Ethernet cables
(x = 2, 5 or 10 meters)

 

 

 Waterproof M12 Power supply cables
(x = 2, 5 or 10 meters)

 

 
 

 

WLg-ABOARD/N V3 & above

 

 

WLg-M12U-ETH-xM (ultra-lock, 4-pole) 

 

 

WLg-M12U-PWR-xM (ultra-lock, 4-pole) 

 

 
 

 

WLg-ABOARD/NP V3 & above

 

 

 WLg-M12U/8-ETH-xM (ultra-lock, 8-pole)

 

 

WLg-M12U-PWR-xM (ultra-lock, 4-pole)

 

 
 

 

WLg-ABOARD/NI

 

 

WLg-M12U-ETH-xM (ultra-lock, 4-pole)

 

 

WLg-M12/6-PWR-xM (6-pole)

 

 
 

 

WLg-ABOARD/NPI

  

 

WLg-M12U/8-ETH-xM (ultra-lock, 8-pole)

 

 

WLg-M12/6-PWR-xM (6-pole)