Ready-to-use WiFi module for integration,
access point, client, repeater and Mesh point
 |
 |
 |
 |
| APPLICATIONS Special machines Robots, drones Embedded electronics | |||
EmbedAir100 module by ACKSYS is designed to quickly and easily add a WiFi connectivity to any Ethernet equipment or embedded electronics.
Ready to use and requiring no external software or drivers, EmbedAir100 considerably reduces development costs, shortens time-to-market and guarantees the longevity of industrial equipment.
EmbedAir100 is an ultra-compact solution that supports WiFi access point, client, repeater and MESH point modes. These modes can operate simultaneously.
It incorporates the latest security standards: WPA3 Personal & Enterprise (Radius), DoS, Firewall… as well as routing functions to facilitate mass deployment (e.g.: machines, mobile devices…).
Its integrated 802.11n 2T2R radio reaches 300 Mbps and transmits any Ethernet-based protocol such as UDP, TCP, Profinet, Modbus / TCP, Safe Ethernet, Ethernet IP…
EmbedAir100 meets the industrial specifications of the most demanding applications: onboard computers, video surveillance, medical, mining, communications and explosion-proof equipment…
Its fast roaming feature (<30ms) makes it also ideal for any kind of mobile applications such as robots or drones for example.
EmbedAir100 is footprint and pin-compatible with its predecessor (WLg-LINK-OEM) in order to maintain compatibility with existing applications.
| Ethernet interface | 1-port Ethernet 10/100 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45 or TTL Ethernet interface (HE10 connector) | ||||||
| WiFi Network | 1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz, ANI (Adaptive Noise Immunity) | ||||||
| WiFi radio data rate | 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps) |
||||||
| Operating frequencies | ISM : 2.4-2.483 GHz (up to 14 channels) UNII : 5.15-5.25 GHz (up to 4 channels) UNII-2 : 5.25-5.35 GHz (up to 4 channels) UNII-2 ext : 5.470-5.725 GHz (up to 11 channels) UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC |
||||||
| Output power | 2.4 GHz : up to 23.5 dBm (aggregate) / 5 GHz : up to 21 dBm (aggregate) | ||||||
| Sensitivity | Receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n | ||||||
| Antennas | 2 Hirose UFL connectors | ||||||
| Security | Firewall, DoS, https, MAC filtering, WPA/WPA2/WPA3-Personal & Enterprise (IEEE 802.1X/RADIUS), tunnels L2 (GRE), VPN (OpenVPN, IPsec), SNMP V3, Rogue AP detector | ||||||
| WiFi modes | Access point, client, MESH (IEEE 802.11s), infrastructure, fast roaming (less than 30 ms), WMM QoS | ||||||
| WiFi services | Hot Spot 2.0, Wireless Load Balancing (Load balancing, load steering, client roaming control) | ||||||
| Ethernet networking | IPv4/IPv6 compliance, frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay | ||||||
| Ethernet routing | Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router | ||||||
| Administration | http, https, SNMP agent (V1, V2C, V3), WaveManager administration software | ||||||
| LEDs signaling | Radio : activity – status | Ethernet : link 10/100 – activity | Power : on-off | ||||||
| Power supply | +5VDC on HE10 connector or jack connector | ||||||
| Consumption | 2.9 Watts typical, 7.6 Watts maximum | ||||||
| Dimensions & weight | Small sized PCB L : 89 x l : 51 x h : 28 mm, 35 g | ||||||
| Standards and certifications |
|
||||||
| Environment | Operating temperature : -20 to +60°C, storage -40 to +85°C, Humidity : 5% to 95% (non-condensing) | ||||||
| Warranty | 1 year |
| EmbedAir100/T | 802.11n 2T2R WiFi access point, Ethernet bridge, repeater & Mesh point embedded module, TTL Ethernet interface, +5VDC power supply (HE10 connector) |
| EmbedAir100/K | 802.11n 2T2R WiFi access point, Ethernet bridge, repeater & Mesh point embedded module, RJ45 Ethernet interface, +5VDC power supply (ø 2.1 jack connector) |
| EmbedAir/CB | Evaluation board with antennas and power supply included. EmbedAir100 or EmbedAir1000 module must be ordered with. |
| Additional accessories : | |
| WL-KIT-ANT-1C | Flat & swivel omnidirectional antenna, RPSMA, 2.4 GHz 3dBi gain / 5 GHz 4dBi gain with pigtail cable (14 cm, ø 1.37 mm, UFL to RPSMA) |
| PWS5-UNI | Power supply for EmbedAir100/K, 100-240VAC to +5VDC, 2A, ø 2.1mm jack connector, 1.5 m cable length |
| Version | Download | |
|---|---|---|
| WaveOS firmware upgrade package, release notes It is recommended to save your configuration to a PC prior to upgrade the firmwareWarning: This new firmware includes major updates to ensure compliance with the EN18031 security standard. The standard requires removing deprecated/weak signature, encryption, and authentication modes. Therefore, before installing the update, you must review and adjust the product configuration to meet EN18031’s minimum security requirements and prevent any lockout caused by settings that will no longer be available. |
4.32.1.1 vx251107 |
BINHASH |
| MIB (SNMP) |
3.24.0.1 vx241004 |
|
| WaveOS : Download the user guide |
– |
 |
| 4G cards firmware update package |
6.3 vx181025 |
|
| Version | Download | |
|---|---|---|
| WaveManager : Deployment & centralized management software for WaveOS-based WiFi products, Windows and Linux platforms |
3.6.5.1 |
|
| Supplementary catalog (graphic resources): download required |
1.6.0.1 |
|
| Download the user guide |
– |
|
Log in to stay informed and access exclusive tools.
Please fill the form to receive the download link :
