Outdoor WiFi bridge
Secure, quick and easy to install wireless point-to-point link- Wireless connection of 2 networks or remote devices
- Easy commissioning using downloadable configuration files
- Secure link
- High speed communication up to 250 Mbps (depends on environment and distance)
- WaveOS operating system
- Power supply: +9VDC to +48VDC and PoE 802.3af
- Very compact cases, rugged and waterproof (IP66)
ACKSYS offers a secure wireless solution that is quick and easy to install, allowing you to create a wireless bridge between two independent Ethernet networks, two separate devices or two buildings by simply programming two AirXroad standard units (download configuration files).
- Indoor use (harsh environment) : wall mounting
-
Outdoor use: installation without additional protection with antennas adapted to the environment and the distance to cover (consult the list of additional accessories). To create an outdoor medium-distance WiFi bridge (on sight and respecting the Fresnel zone), we recommend the use of gain directional antennas.
Technical characteristics (for 1 device)
Ethernet interface |
1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, 8 pts X-coded M12 connector
|
|||||||||||||||||||||||
WiFi interface |
1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz
|
|||||||||||||||||||||||
WiFi radio data rate |
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)
|
|||||||||||||||||||||||
Operating frequencies |
ISM : 2.4-2.483 GHz (up to 14 channels)
|
|||||||||||||||||||||||
RF Output power |
2,4 GHz : 23,5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)
|
|||||||||||||||||||||||
FR Sensitivity
|
Receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n |
|||||||||||||||||||||||
Antennas connections
|
2 RP-SMA male connectors |
|||||||||||||||||||||||
WiFi modes |
Access point, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS
|
|||||||||||||||||||||||
Administration |
http, https, SNMP agent (V1, V2C, V3), ACKSYS WaveManager & WaveViewer administration softwares
|
|||||||||||||||||||||||
Security |
Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE),
|
|||||||||||||||||||||||
Ethernet networking
|
Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay |
|||||||||||||||||||||||
Ethernet routing
|
Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router |
|||||||||||||||||||||||
LEDs Signaling |
Radio : activity - status | Ethernet : link 10/100/1000 - activity | Power : on-off
|
|||||||||||||||||||||||
Power supply |
+9VDC to +48VDC ULTRA-LOCK M12 4-point connector & PoE 802.3af
|
|||||||||||||||||||||||
Consumption |
IDLE mode : 1.7 W / Maximum average : 5.8 W / Recommended power supply : 7 W
|
|||||||||||||||||||||||
Mechanical specifications |
Dimensions : 115 mm x 64 mm x 34 mm
|
|||||||||||||||||||||||
IP rating
|
IP66 |
|||||||||||||||||||||||
Environmental conditions
|
Operating temperature: -40°C to +70°C, storage : -40°C à +85°C, relative humidity: 0% to 99% (non-condensing) |
|||||||||||||||||||||||
Standards and |
|
|||||||||||||||||||||||
Warranty
|
5 years |
Datasheet
Technical documentation
Application notes
- APPNOTE_WaveOS-Wireless-link_APNUS003.pdf
- APPNOTE_NAT-configuration-example_APNUS013.pdf
- APPNOTE_OpenVPN-tunnel_APNUS015.pdf
- APPNOTE_GRE-tunnel-over-WiFi_APNUS018.pdf
- HOWTO_IPv6-SLAAC-RA-Server_APNUS025.pdf
- APPNOTE_RogueAP-detection_APNUS027.pdf
- HOWTO_Upgrade-firmware_APNUS028.pdf
- HOWTO_BackupRestore-Conf-Files_APNUS029.pdf
- HOWTO_Change-basic-parameters-with-CLI-commands_APNUS030.pdf
- APPNOTE_NAT-Port-Forwarding_APNUS032.pdf
- APPNOTE_Acksys-Recovery-Options_APNUS033.pdf
- APPNOTE_Wireless_Load-Balancing_APNUS035.pdf
- HOWTO_Configure-Basic-Alarms-and-Events_APNUS036.pdf
- HOWTO_Configure-VRRP_APNUS037.pdf
- HOWTO_Configure-Acksys-Router-for-External-Radius-Authentication_APNUS038.pdf
3D views
Firmware
Software
References to order
AirXroad
|
WiFi Access Point, Ethernet Bridge, Repeater and MESH point (IEEE 802.11n a/b/g) for automotive applications, power input from +9VDC to +48VDC plus POE, shipped without cables or antennas |
||
Additional accessories :
WL-M12U/8X-ETH-2M WL-M12U/8X-ETH-5M WL-M12U/8X-ETH-10M
AXR-SET
|
Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 2 meters Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 5 meters Ethernet cable, 8pts X-coded M12 SPEEDCON to RJ45, 10 Gbps 10 meters
Connecting set including :
|