Indoor WiFi bridge

ACKSYS offers a secure wireless solution that is quick and easy to install, allowing you to create a wireless bridge between two independent Ethernet networks, two separate devices (PC, camera, printer, etc.) or two buildings* by simply programming two Airlink_V2 standard units (download configuration files). > Indoor use: wall mounting or DIN rail > * Outdoor use: installation in an outdoor cabinet with antennas adapted to the environment and to the distance to be covered (consults the list of additional accessories).

Ethernet interface	1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45 Ethernet interface
WiFi interface	1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz, ANI (Adaptive Noise Immunity)
WiFi radio data rate	802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)
Operating frequencies	ISM : 2.4-2.483 GHz (up to 14 channels) UNII : 5.15-5.25 GHz (up to 4 channels) UNII-2 : 5.25-5.35 GHz (up to 4 channels) UNII-2 ext : 5.470-5.725 GHz (up to 11 channels) UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC
Output power	2.4 GHz : 23.5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)
Sensitivity max.	2.4 GHz : -94 dBm / 5 GHz : -96 dBm
Radio connectors	2 x RP-SMA
Security	Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3, client isolation in AP mode
WiFi modes	Access point, client, MESH (IEEE 802.11s), infrastructure, fast roaming (less than 30 ms), WMM QoS
Ethernet networking	Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay
Ethernet routing	Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router
Administration	http, https, SNMP agent (V1, V2C, V3), WaveManager administration software
LEDs Signaling	Radio : activity – status | Ethernet : link 10/100/1000 – activity | Power : on-off
Power supply	+9VDC to +48VDC, 3-pin Phoenix connector & PoE Powered Device 802.3af (from model V2)
Consumption	IDLE mode : 1.7 W / Maximum average : 5.8 W / Recommended power supply : 7 W
Dimensions & weight	Compact case L : 103 x l : 67 x h : 24 mm, weight 225 g
Standards and certifications	CE (RED) Safety : EN 62368-1:2014+A11, EN62311 EMC : EN301-489-1, EN301-489-17 Radio : EN 300 328 2.1.1 (2.4 GHz), EN 301 893 2.1.1 (5 GHz, DFS) FCC Radio : FCC ID Z9W-RMB Environmental Shocks and vibration : EN 61373 (CAT 1 CLASS B)
Environment	IP30 Operating temperature: -20°C to +60°C , storage: -40°C to +85°C, humidity: 0% to 99% (non-condensing)
Warranty	5 years

AirLink (2 units to order)	WiFi access point, client, repeater (WDS) and MESH point (IEEE 802.11 a/b/g/n), 10/100/1000 RJ45 Ethernet interface, shipped with two 2.4GHz – 3 dBi / 5GHz – 4 dBi antennas
Accessories
WL-ANT-2458/3-ORPS PWS12-UNI-PH3 WL-FIX-RD2	Flat & swivel omnidirectional antenna, 2.4GHz (3dBi) / 5GHz (4dBi), RPSMA AC (110V / 220V) to 12VDC power adapter with cable terminated by a 3-pin Phoenix terminal block Din rail fixing kit