11n WiFi access point, client, repeater & Mesh point designed for industrial applications in harsh environments
| Ethernet interface | 2-port Ethernet 10/100 auto-sensing, Base TX, auto MDI/MDIX, M12 D-coded Ethernet interface | ||||||
| WiFi interface | 1 radio 802.11n (MIMO 2T2R, 300 Mbps), ANI (Adaptive Noise Immunity) | ||||||
| WiFi radio data rate | 802.11a: 6, 9, 12, 18, 24, 36, 48 & 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 & 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps) |
||||||
| Operating frequencies | ISM : 2.4-2.483 GHz (up to 14 channels) UNII : 5.15-5.25 GHz (up to 4 channels) UNII-2 : 5.25-5.35 GHz (up to 4 channels) UNII-2 ext : 5.470-5.725 GHz (up to 11 channels) UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC |
||||||
| Output power | 2,4 GHz : 23,5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate) | ||||||
| Sensitivity max. | WiFi 802.11n receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n | ||||||
| Radio connectors | 2 N-type connectors | ||||||
| Security | Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3 | ||||||
| WiFi Modes | AP, client, MESH (IEEE 802.11s), infrastructure, fast roaming (less than 30 ms), WMM QoS | ||||||
| Ethernet networking | Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay | ||||||
| IP routing | Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router | ||||||
| Administration | http, https, SNMP agent (V1, V2C, V3), WaveManager administration software, save / restore configuration key (C-Key) | ||||||
| LEDs Signaling | Radio : activity – status | Ethernet : link – activity | Power : on-off | C-Key : activity | ||||||
| I/O | A 3-pin Waterproof M8 connector with : – one solid state relay output warning (with configurable action), 1 Form A, 60VDC 80mA max – one input for external device control 24VDC max |
||||||
| Power supply | +9VDC to +48VDC, redundant, M12 connector 4-pole A-coded & PoE 802.3af (15.4W), mode A/endspan compatible | ||||||
| Consumption | IDLE mode : 1.7 W / Maximum average : 3.92 W / Recommended : 6.5 W | ||||||
| Dimensions & weight | L : 175 x l : 80 x h : 75 mm (without connectors), weight 800 g | ||||||
| Standards and certifications |
|
||||||
| Environment | IP66 Operating : -40°C to +70°C , HR: 0-99% |
| RuggedAir/1A | WiFi access point, client, repeater (WDS) & MESH point (802.11n), M12 Ethernet interface 10/100 |
| Included accessories : | |
| C-Key_M1 WL-PLT-1 |
Save / Restore configuration key 4-point fixing plate with ground lug |
| Additional accessories : | |
| WLg-M12U-ETH-2M WLg-M12U-ETH-5M WLg-M12U-ETH-10M WL-M12-PWR-2M WL-ANT-2458/2-ONM |
Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 2 meters Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 5 meters Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 10 meters M12 Sealed Power Cable, 4 Wires, 2 m, EN50155 / EN45545 Compliant Dual band (2.4 / 5 Ghz) 2 dBi omni-directional antenna |
| Version | Download | |
|---|---|---|
| WaveOS firmware upgrade package, release notes It is recommended to save your configuration to a PC prior to upgrade the firmwareWarning: This new firmware includes major updates to ensure compliance with the EN18031 security standard. The standard requires removing deprecated/weak signature, encryption, and authentication modes. Therefore, before installing the update, you must review and adjust the product configuration to meet EN18031’s minimum security requirements and prevent any lockout caused by settings that will no longer be available. |
4.32.1.1 vx251107 |
BINHASH |
| MIB (SNMP) |
3.24.0.1 vx241004 |
|
| WaveOS : Download the user guide |
– |
|
| 4G cards firmware update package |
6.3 vx181025 |
Log in to stay informed and access exclusive tools.
Please fill the form to receive the download link :