WLg-SWITCH

WLg-SWITCH

Overview

  • WiFi IEEE 802.11 a/b/g/h & super AG, up to 108 Mbps

  • Security : WEP, WPA-PSK, WPA2-PSK & IEEE 802.1x RADIUS

  • Web based configuration, SNMP administration

  • 8-port Ethernet 10/100 Base TX with PoE 802.3af injector 

  • Dual DC power supply input (+9VDC to +75VDC)

  • IP30 metal enclosure, DIN rail or panel mounting

Introduction

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.

Both Switch and power injector are manageable that make it possible to offer advanced configuration.

 

WLg-SWITCH can be managed using a web browser or SNMP; the “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment, giving it a high availability.

 

WLg-SWITCH fulfills the most severe requirements in terms of operating environment: operating temperature from -25°C to +70°C (-4°F to 158°F), shock and vibration proof according to MIL-STD-810F standard, IP 30 seal rating.

Technical characteristics

 


 Ethernet Switch

 

 

8-port 10/100 Base TX Fast Ethernet interface, RJ45 connector, auto MDI/MDIX crossover, IEEE 802.3x full-duplex and half-duplex auto-adaptive, wire-speed reception and transmission, high performance lookup engine, automatic address learning and aging, 120W PoE PSE feature according to IEEE 802.3.af
  

 
 

 

WiFi network

 

 

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; "ClearVoice" band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set

 

 
 

 

Radio data rate

 

 

Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps

 

 
 

 

Channels

 

 

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Number of channels may vary depending on local laws.

 

 
 

 

Output power

 

 

Transmitter +20 dBm (Optional 26 dBm)

 
 

 

Sensitivity

 

 

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

 
 

 

Antennas

 

 

Two 2dBi 2.4 / 5 GHz antenna for diversity mode

 
 

 

Modulation

 

 

OFDM: BPSK, QPSK, 16QAM, 64QAM

DSSS: DBPSK, DQPSK, CCK

 

 
 

 

Security

 

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control

 

 
 

 

Modes

 

 

Access point to build a WiFi network infrastructure, Bridge, Bridge router, fast roaming, Infrastructure & AD-HOC, BRIDGE ROUTER, rapid roaming (less than 50 mS)  modes are supported

 

 
 

 

Administration

 

 

Built-in WEB interface, SNMP V2c agent, ACKSYS NDM (Networking Device Manager).
ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-SWITCH unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)

 

 
   

Operating systems

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 

 
 

 

Protocols

 

 

Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …

 

 
 

 

Signaling

 

 

Led display for power supplies, LAN on each port & WLAN activity, radio receive level

 

 
   

Alarms

 

 

Relay output warning: power failure, LAN or WLAN connection failure, Watchdog.
1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal

 

 
 

 

Power supply

 

 

Dual input, +9 to +75VDC, removable clamp cage terminal
Device should be powered from a +48VDC power supply (130W) in the PoE PSE mode

 

 
   

Consumption

 

 

10 Watts maximum (PoE injector power consumption not included)

 

 
 

 

Dimensions & weight

 

 

L: 110 mm x W: 50 mm x H: 151 mm (4.33 x 1.97 x 5.94 inch), weight 650g (22.9 oz)

 

 
 

 

Environment

 

 

Operating temperature: -25°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F),
Humidity: 5% to 95% (non-condensing), IP 30 seal rating

 

 

Applications WLg-SWITCH US 

References to order

 

 

WLg-SWITCH

 

 

3-in-1 combo: 8-Port Ethernet switch, WiFi Access Point / Ethernet Bridge / Repeater (IEEE 802.11a/b/g/h & super AG, 2.4 / 5 GHz operation), 8-port power injector (130W), shipped with two 2dBi 2.4 / 5 GHz antennas

 

 
 

 

C-Key_M1

 

 

Save / Restore configuration key for the WLg-Switch

 
 

 

WLg-RF400MW

 

 

High power radio option (26 dBm, 400 mW)

 
 

 

WLg-FIX-PLQ

 

 

Panel fixing metallic plate

 
 

 

CAB-RJ45-1M

 

 

1 meter Ethernet RJ45 cable, straight