WLn-xROAD

11n WiFi access point, Ethernet bridge, repeater & Mesh point
WLn-xROAD

NOTE : WLn-xROAD has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : AirXroad. Your sales representative is at your disposal for any questions.

 

Overview

  • WiFi IEEE 802.11a/b/g/n radio (MIMO 3T3R), up to 450 Mbps radio bit rate
  • MESH, WMM QoS, multiple SSID and centralized RADIUS security support
  • Web based configuration, SNMP administration
  • Auto-sensing Gigabit 10/100/1000 Base TX auto MDI/MDIX network interface
  • DC power supply input (+9VDC to +36VDC)
  • Shock & vibration proof rugged aluminum enclosure, IP66 seal rating

Introduction

WLn-xROAD is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes or in any rotating machinery, for material handling, real-time information transmission, and inventory management.

 

The device relies on the multi-streams MIMO technology that contributes to an expanded coverage, higher data throughput and increased radio link reliability.

 

It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shock and vibration proof, protection against dust and water projections (IP66).

 

WLn-xROAD is E-marked (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.

 

Technical characteristics

 

 

Ethernet link

 

Gigabit 10/100/1000 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over
  

 
 

 

WiFi network

 

Compliant to the IEEE 802.11a/b/g/n MIMO 3T3R, 2.4 / 5 / 5.4 GHz standards

 

 
 

 

Radio data rate

 

 

450 Mbps

 
 

 

Radio channels

 

2.4 GHz (802.11b/g/n): 14 channels / 5 GHz (801.11a/h/n): 24 channels

 

 
 

 

Output power

 

 

Transmitter +20 dBm (TPC)

 

 
 

 

Sensitivity

 

 

Receiver -92 dBm for IEEE 802.11 a/g/n and -95 dBm for IEEE 802.11b

 

 
 

 

Antennas connections

 

 

Up to three 2.4 / 5 GHz MIMO antenna, RP-SMA type connectors

 

 
 

 

Modulation

 

 

OFDM: BPSK, QPSK, 16QAM, 64QAM / DSSS: DBPSK, DQPSK, CCK 

 

 
 

 

Security

 

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (centralized RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

 

 
 

 

Modes

 

 

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network, MODBUS/TCP wireless gateway, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, bridge router,  fast roaming (less than 30 ms single channel), redundancy (VRRP), WMM QoS, multicast and IGMP-Snooping modes are fully supported.

 

 
 

 

Administration

 

Built-in WEB interface, the setup of the device is achieved using any web browser, SNMP agent, ACKSYS NDM

 

 
 

 

Operating systems

 

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

 

 
 

 

Signaling

 

 

LEDs signaling for radio quality, activity and status, Link 10/100/1000 and activity for the LAN port

 

 
 

 

Power supply

 

 

DC power supply (+9VDC to +36VDC), terminal block inside the enclosure

 

 
 

 

Consumption

 

10W typical power consumption

 

 
 

 

Dimensions & weight

 

Shockproof rugged aluminum enclosure, (L: 185 x W: 64 x H: 35 mm), 450 g with the cable and without the antennas

 

 
 

 

Standards

 

 

MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP66 seal rating

EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)

 

 
 

 

Environment

 

Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +85°C

 

 

Firmwares

V2 model Version Download

WaveOS firmware upgrade package, release notes
It is recommended to save your configuration to a PC prior to upgrade the firmware

3.18.3.1
vx190419

Download

MIB (SNMP)

3.10.7.1
vx190419

Bootloader upgrade : concerns only WLn-xROAD_V2 with a 2.4.6 firmware or a prior one
Warning : upgrading the bootloader involves a potential risk for your product. If the upgrade is interrupted, the product will be out of order, and you will need to return your product to Acksys

1.6.4.1

Download
V1 model Version Download

WaveOS firmware upgrade package, release notes
It is recommended to save your configuration to a PC prior to upgrade the firmware

3.18.1.1
vx181118

Download

MIB (SNMP)

3.10.6.1
vx181017

Softwares

Version Download
WaveManager : Deployment & centralized management software for WaveOS-based WiFi products, Windows platforms

2.8.0.1
vx200430

Download
Download the user guide

Download
Version Download

WaveViewer : Android application allowing to visualize ACKSYS devices administered by WaveManager via a smartphone or a tablet. WaveManager is a desktop supervisor software that allows to centralize ACKSYS WaveOS devices in your network. WaveViewer can communicate with WaveManager in real time. Minimum version of WaveManager required: V1.8.0.1

1.0.1.1
vx181130

Télécharger

NOTE : WLn-xROAD has reached the end of its life cycle (to know more about its different deadlines click here).
The recommended replacement product is : AirXroad. Your sales representative is at your disposal for any questions.

 

Reference to order

 

 

WLn-xROAD

 

WiFi Access Point, Ethernet Bridge, Repeater & MESH point (IEEE 802.11n a/b/g) for automotive applications, power input from +9VDC to +36VDC, shipped with 3 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and 2 meters of Ethernet RJ45 cable & power cable