RuggedAir100

11n WiFi access point, client, repeater & Mesh point designed for industrial applications in harsh environments

Information request

Overview

All-in-one : AP/client/repeater/Mesh point
WiFi 802.11n (MIMO 2T2R), 2.4/5 GHz
Advanced security functions, VPN, firewall...
WaveManager centralized management software
Operating System : WaveOS
Rugged device : shocks & vibrations proof, IP66, dual insulated redundant input +9VDC to +48VDC or PoE
Fast roaming < 30 ms
Compatible with its predecessor WLg-ABOARD

Introduction

As its predecessor (WLg-ABOARD) with which it is compatible, RuggedAir100 is an "all-in-one" multifunction product (access point, client, repeater, router & Mesh point) designed for industrial applications in harsh environment (IP66 waterproof, shocks and vibrations proof, extended temperature range, M12 connectors...). It can be used either on the ground to create indoor or outdoor WiFi coverages, or on board to connect all types of mobile equipment or vehicles (trams, construction/agricultural machines, trucks, automated cranes, harbor cranes...) to the ground network.

Reliability : it is equipped with a redundant wide range (9-48 VDC) or POE power supply as well as 2 antennas making it possible to reinforce the quality of the radio link and to increase the throughputs.
Mobility : its roaming performances (<30 ms) and its shocks/vibrations resistance make it easy to integrate in any type of mobile equipment or vehicle.
Ease of deployment and maintenance : RuggedAir100 can be easily managed from the network with the centralized management software WaveManager, through SNMP or from a simple web browser. It also has a C-Key (key saving configuration) for instant replacement on site.
Security : it integrates advanced security standards (Firewall, VPN, 802.1X ...) as well as routing and filtering functions to facilitate mass deployments.

Technical characteristics

Ethernet interface

2-port Ethernet 10/100 auto-sensing, Base TX, auto MDI/MDIX, M12 D-coded Ethernet interface

WiFi interface

1 radio 802.11n (MIMO 2T2R, 300 Mbps), ANI (Adaptive Noise Immunity)

WiFi radio data rate

802.11a: 6, 9, 12, 18, 24, 36, 48 & 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 & 54 Mbps
802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)

Operating frequencies

ISM : 2.4-2.483 GHz (up to 14 channels)
UNII : 5.15-5.25 GHz (up to 4 channels)
UNII-2 : 5.25-5.35 GHz (up to 4 channels)
UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)
UNII-3 : 5.725-5.825 GHz (up to 4 channels)
Supports DFS and TPC

Output power

2,4 GHz : 23,5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)

Sensitivity max.

WiFi 802.11n receiver : -92 dBm for 802.11 b/g/n and -96 dBm for 802.11a/n

Radio connectors

2 N-type connectors

Security

Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3

WiFi Modes

AP, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS

Ethernet networking

Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay

IP routing

Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router

Administration

http, https, SNMP agent (V1, V2C, V3), WaveManager administration software, save / restore configuration key (C-Key)

LEDs Signaling

Radio : activity - status | Ethernet : link - activity | Power : on-off | C-Key : activity

I/O

A 3-pin Waterproof M8 connector with :
- one solid state relay output warning (with configurable action), 1 Form A, 60VDC 80mA max
- one input for external device control 24VDC max

Power supply

+9VDC to +48VDC, redundant, M12 connector 4-pole A-coded & PoE 802.3af (15.4W), mode A/endspan compatible

Consumption

IDLE mode : 1.7 W / Maximum average : 3.92 W / Recommended : 6.5 W

Dimensions & weight

L : 175 x l : 80 x h : 75 mm (without connectors), weight 800 g

Standards and
certifications

CE (RED)	Safety : EN 62368-1:2014+A11, EN62311
	EMC : EN 301 489 [-1], [-17]
	Radio : EN 300 328 (2.4 GHz), EN 301 893 (5 GHz, DFS)

FCC	Radio : FCC ID Z9W-RMB

Environmental	Shocks & vibrations : EN 61373 (CAT 1 CLASS B)
	Climatic : EN60068-2 [-1, -2, -30]

Environment

IP66
Operating : -40°C to +70°C , HR: 0-99%

Datasheet

ACKSYS_RuggedAir100_US.pdf

Technical documentation

Application notes

3D views

RuggedAir_1AWL-PLT-1.3Dstep_ap214.A1.stp_.zip

Firmware

	Version	Download
WaveOS firmware upgrade package, release notes It is recommended to save your configuration to a PC prior to upgrade the firmware	4.22.3.1 vx231025	BIN HASH
MIB (SNMP)	3.20.0.1 vx231025	BIN HASH
WaveOS : Download the user guide	–
4G cards firmware update package	6.3 vx181025

Software

	Version	Download
WaveManager : Deployment & centralized management software for WaveOS-based WiFi products, Windows and Linux platforms	3.6.0.1 vx230613
Supplementary catalog (graphic resources): download required	1.3.0.1 vx231003
Download the user guide	–

References to order

RuggedAir/1A

WiFi access point, client, repeater (WDS) & MESH point (802.11n), M12 Ethernet interface 10/100

Included accessories :

C-Key_M1

WL-PLT-1

Additional accessories :

WLg-M12U-ETH-2M
WLg-M12U-ETH-5M
WLg-M12U-ETH-10M

WLg-M12U-PWR-2M
WLg-M12U-PWR-5M
WLg-M12U-PWR-10M

WL-ANT-2458/2-ONM

RGA100-SET

Save / Restore configuration key

4-point fixing plate with ground lug

Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 2 meters

Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 5 meters
Ultra-Lock 4-point Ethernet cable, M12 to RJ45, 10 meters

Ultra-Lock waterproof 4-point M12 power supply cable, 2 meters
Ultra-Lock waterproof 4-point M12 power supply cable, 5 meters
Ultra-Lock waterproof 4-point M12 power supply cable, 10 meters

Dual band (2.4 / 5 Ghz) 2 dBi omni-directional antenna

Connecting set including :

1 x WLg-M12U-ETH-2M
1 x WLg-M12U-PWR-2M
2 x WL-ANT-2458/2-ONM